Starter tool guides — Page 3
OneRestore Glass Cleaner: Restoration Chemical, Not Bucket Soap
Use the current data sheet and SDS to reject excluded glass, run the unusual dry-dot pretest, and keep full cleaning wet through the rinse.
How to Clean Eze-Breeze Windows Without Treating Vinyl Like Glass
Identify the panel type, remove forbidden cleaners, preserve vent order, and follow the current Eze-Breeze one-capful-per-gallon care method.
Post-Construction Window Cleaning Starts Before You Choose a Scraper
Build cleaning lots from the glass schedule, residue map and owner instructions, then use one daylight test before any scraper or solvent expands.
Will a XERO Screen Cleaner Fit Your Route? Test the Screens First
Inspect screen condition, measure the actual pass-through, rehearse the wet route and time one mixed batch before trusting a XERO Screen Cleaner demo.
Window Track Cleaning Tools: Match the Soil Before You Wet It
Separate loose debris from bonded grime, match brushes and vacuums to the exact window, protect drainage openings and stop before unapproved lubricant.
Replacement Ladder Feet: Match the Model and Mark Before Ordering
Separate a worn pad from a damaged shoe or rail, then match the ladder maker, model, Mark, hardware and current instructions before it returns to service.
Fiberglass vs Aluminum Ladder: Compare Electrical Risk and Handling
Compare exact ladder weight, duty rating and route handling after electrical exposure is closed. See why material alone cannot decide the purchase.
Will the PiViT Ladder Tool Fit Your Ladder and Work Surface?
Check ladder-foot geometry, measured surface limits, the 500-lb accessory rating and 9-lb route footprint before assigning the PiViT one job.
Ettore ProGrip Window Squeegee: Pick the Size—and Check the Blade
Choose an exact ProGrip size and model, verify pane clearance and REA-C-H fit, and resolve conflicting blade-service claims before checkout.
A Ladder Leveler Must Match the Rail, Mount, and Foot
Separate permanent from quick-connect systems, verify the exact ladder, base, hardware and manual, and see why adjustment range cannot approve a setup.
Bio-Clean Hard Water Stain Remover: Deposits, Not Etched Glass
Match the Bio-Clean container to its current label and SDS, rule out abrasive-sensitive glass, and separate removable deposits from etched haze.
NOVUS Plastic Polish Has Three Steps—and a Surface Veto
Identify the plastic and coating first, then separate NOVUS #1 cleaning, #2 fine-scratch work and #3 heavy-scratch preparation under the current SDS.